开云体育

Mike Because uBITX Encoder is very sensitive, I used the threshold method. It is not the same as the original firmware, although it gives a difference in the value when it is rotated slowly and when

Dex ZL2DEX I think the post was about a recent software upgrade, whether the new code retained the dynamic tuning feature or if it had regressed to fixed-rate tuning. Do you have a software example

I've mentioned this before: "shuttle tuning". There's a sketch way back in the dim dark past that dynamically changed the step size according to how fast the encoder was being spun. 1Hz/step slow to

Mike If an environment where have to continue using IF Shift, I think it would be nice to adjust the BFO as you said. Because IF-Shift is shift the BFO. And I used Audio Spectrum for the first time

Dennis Thanks for your feed back. I just released uBITX Firmware CEC Version 1.061, It also includes uBITX Manager 1.01. Starting with uBITX Manager 1.0, there is an option for setting IF Shift. If

You may just need to adjust the BFO. Out of the box mine was way off. Made everything sound tinny. If you use a program like spectrogram you can look at the audio output and see that it's shifted to

Henning, I re-spaced the turns and reran the spectrum analyzer for both two-tone and single tone. No discernible difference from before. So you are correct. I still plan on building a similar mixer

Philip Thank you for important feed back when WSPR Menu, Fixed a bug where the LPF does not change with the WSPR band. (Changed version to 1.061) If you have spare time, please test WSPR

i hope you guys are using sufficient attenuation ahead of the spectrum analyzer. typically, if you change the attenuation, the harmonica and the fundamental should fall exactly the same dbs. - f

Junior, When doing a two-tone and single tone test I do not see these harmonics. Carrier suppression is not what I would like but no harmonics. tim ab0wr Júnior PY2ADA via Groups.Io

I have decided to go in a different direction and use another type case to build my uBitx radio. So I would like to sell a case along with an 8 ohm speaker and also a roll of Copper Foil.? The case

Thanks Mike.? Usually when I order something online (and I do that a LOT!), I get a notice from the vendor that they have my order and, sometimes, give me an estimated date for shipment. Just

SolderSmoke Podcast #203 Winter, Transceivers, Antennas, DC RX, uBITX, Mixers, 'fests, MAILBAG | | | | | | | | | | | SolderSmoke Podcast #203 Winter, Transceivers, Antennas, DC RX,

Hi Ian. I am afraid that the LPF selection problem is back with V1.06. Need to select the correct band before doing a WSPR beacon. The same as V1.05, before V1.051. Philip G7JUR

Should be interesting finding a free freq...let's give it a shot anyway. 73 Tom VE3THR

Testing with the micro bitx in the spectrum analyzer, I found that the harmonics reduction is very low. Has anyone else done this measurement to compare? The photos are 3 per band (fundamental, second

My bad...I didn't even think of those calls. In the main INO file are the following defines: /** * These are the indices where these user changable settinngs are stored in the EEPROM */ #define

All The test period was extended because some features were added before Version 1.06 was released. I released version 1.06 which added WSPR function to uBITX. Beta testers have been very helpful

Good luck setting the sidetone within the calibration menu of the original uBitx code. In file ubitx_menu.ino, I see this line at the end of menuSetupCwTone() ? ? EEPROM.put(CW_SIDETONE,

Maybe its EEPROM.get? and EEPROM.put rOn To: [email protected] Sent: Saturday, March 24, 2018 10:44 AM Subject: Re: [BITX20] uBITX EEPROM MAP Joe: Interesting. I just did a GREP on all the