Because uBITX Encoder is very sensitive, I used the threshold method. It is not the same as the original firmware, although it gives a difference in the value when it is rotated slowly and when it is rotated rapidly.
Instead, as John and Vince said, I made the Tune Step changeable.
Press and hold the Function Key for more than 2 seconds to display the message. Then release the key.
You can select Tune Step by turning the dial.
If you are using uBITX Manager, you can also design your own Tune Step for yourself.
Thank you for using the uBITX Firmware CEC version.
Ian KD8CEC
2018-03-24 21:28 GMT+09:00 Michael Maiorana <zfreak@...>:
I installed Ian's excellent uBitx firmware last night, version 1.04. I haven't played with the memory manager yet but I will today.
One feature that seems to be gone is what I call "ballistic" tuning. With the old firmware, when the encoder was turned rapidly, the frequency would move significantly. The new CEC firmware doesn't seem to do that anymore. Is it an option that can be turned on again or was that removed to add all the other excellent features currently in the firmware?
Best regards and 73 Mike M. KU4QO
-- Best 73 KD8CEC / Ph.D ian lee kd8cec@... (my blog)
