开云体育

SUPER!! I hope more people will follow your example. (Love the board holder!) Jack, W8TEE To: [email protected] Sent: Sunday, February 11, 2018 12:10 PM Subject: Re: [BITX20] Raduino seperate Thanks,

Thank you MIke and Ian. The eeprom was my first thought but I eliminated it thinking that it would be initialized each time you load a different software. Where can I download the uBitx manager from?

Thanks, Jack, Yep, been working on my SMD soldering skills... Just waiting on my SI5351A's to arrive. I have all the rest. SMD soldering skill training progress here... Bernie, KC9SGV

Tim, the AF potentiometer deliverd by HF Signals with the BITX40 kit has a value of 10k. Am 11.02.2018 um 15:39 schrieb Tim Gorman:

And a lot of thru hole parts are becoming obsolete 73 Ken VA3ABN. jjpurdum@...> wrote:

I use a 13.5 , 2 amp power source instead of 12 volts lead-acid battery, like in shown voltages chart. Remeasured voltages are: Q13: collector 13.34 v, base 4.21 v, emmitter 3.57 v As i see they are

I am ?putting black lead of vom on ground (black wire of the power connection and red lead of vom on the pin I am measuring. ?Is this correct? The square pin 1is [] ok you said go clockwise counting

I think it's always a good idea to get the rig working with the "standard" software. Then look at a single mod you'd like to make. Making two or more mods at once complicates things if they don't work

Bernie: Don't let the SMD stuff scare you. Have you tied working with them? True, it's a little daunting at first, but not too bad once you've experimented with them. I'll be 75 in a few months and,

So, We are waiting for a link to a shopping cart for spares on HFSigs.com. Can we also please have a link here on this forum to Mike Hagen ? The dead Raduino issue is a huge problem. No spares and SMD

Is the factory default recommended?? Or one of the updates? thanks, Paul K0ZYV

Looks like L3, and possibly other series elements in the 40 m filter got way too much voltage. You'll probably have to use an ohmmeter to test out each connection and see what has become

Hello Apparently there are huge differences between shipping and delivery for different methods (India Post versus DHL) and various delays in customs for various countries. Also, local delivery in the

You can get an improved raduino from Mike Hagen on this forum Dave

Also consider adding the protection diodes discussed an this page. It will protect Q13 from high power transmitters that will cause Q13 to fail.

Hi Farhan I had sent an email to HFSignals about ordering a seperate Raduino, as I had ordered the Bit40 before Raduino was available. The reply I received was ' Yes. But you have to wait till our

I would say that Q13 is bad. Here is a document that shows approximate voltages to compare (Thanks Randy!). /g/BITX20/files/K7AGE/BITX40%20Voltage%20Measurments.pdf Marco - KG5PRT

hi Josias I'm very calm, but I don't understand why they do not update this information on their site. They could suspend purchases for some time. it makes no sense to continue buying while they are

I forgotten to write in a first message. This transceiver board was NEVER transmit, only receive.

Looks like you have had rf from the other radio connect antenna wire to c6 see if you can receive any think that will test q1 is OK if yes replace burnt tracks near L3/L2 check c4/c5 not shorted if