¿ªÔÆÌåÓý

  1. BITX20
  2. Messages
Expanded Topics Messages Polls
Date
Re: BITX QSO Night, Sunday, December 3, 7pm Local Time, 7277 kHz in North America, 7177 kHz elsewhere

John P
 

Nothing but noise here also!
--
John - WA2FZW
Re: BITX QSO Night, Sunday, December 3, 7pm Local Time, 7277 kHz in North America, 7177 kHz elsewhere

 

not hearing much of anything at 0000Z (7PM) so will try again around 0100Z. I updated my raduino last thurs and forgot to do the calibration and other changes for rel. 1.27.2 so I am running qrp of the kenwood for the time being. At least I can give real sig strength reports hihi.
Re: elves are at it

Simon Thompson
 

¿ªÔÆÌåÓý

When can I get one, or two, or three?

On Dec 3, 2017, at 3:30 PM, David Woodward <kf4wbj2@...> wrote:

haven't had this much anticipation since I was a kid...

On Dec 3, 2017 5:26 PM, "MAc B" <sp9mrn@...> wrote:
Waiting....





Re: elves are at it

 

haven't had this much anticipation since I was a kid...

On Dec 3, 2017 5:26 PM, "MAc B" <sp9mrn@...> wrote:
Waiting....


Re: elves are at it

 

Waiting....
Re: BITX QSO Night, Sunday, December 3, 7pm Local Time, 7277 kHz in North America, 7177 kHz elsewhere

John P
 

Had about a 20 minute QSO with Tom (VE3THR; not on his BitX) and worked Mike (WA3O - BitX to BitX) this afternoon. Conditions weren't great; lots of QSB and some broadcast QRM, but seemed a little better than they've been in the evening lately. We'll see what happens at 7PM!
--
John - WA2FZW
Re: elves are at it

 

Now we need a special edition board with an autographed schematic (suitable for framing of course).
Re: Choosing a toroid for impedance matching from antenna to NE602

 

¿ªÔÆÌåÓý

Have a look at this link

?

73 ¨C LU5DNM

?

De: [email protected] [mailto:[email protected]] En nombre de Jerry Gaffke via Groups.Io
Enviado el: domingo, 03 de diciembre de 2017 01:55 p.m.
Para: [email protected]
Asunto: Re: [BITX20] Choosing a toroid for impedance matching from antenna to NE602

?

Here's an interesting document regarding impedance matching networks to feed the 602/612 mixers:?

?
Page 3 tells us that the SA602A has the same mixer as the SA605, as described in this app note.
Page 3 includes some other history, but never quite says what an SA612A is (only what the SA612 was).
Page 6 shows that when driven single ended at 10mhz, the input impedance is around 5k
Page 9 reminds us that when driving the mixer differentially, that input impedance is doubled to 10k.

Page 4 of the datasheet: ??
says ? "AC input impedance is approximately 1.5k || 3 pF through 50 MHz."
I'm pretty sure that would be doubled to 3k when driven differentially.
Since this is a later document than AN1994 and is specific to the currently available SA612A,
seems more likely to be correct with regard to the input impedance. ?But that's by no means certain.

This blog posts suggests that for all parts currently available, the 602's are the same as the 612's.
The story conflicts a bit with AN1994 page 3 in that it claims the upgraded part was called the 612, not the 602A.
Never says anything about the A variants, though that transition happened around 1990, long before this was written.
Also explains that the NE612 was good only from 0-70C, whereas the SE612 is good from -40 to 85C.
The only 602/612 part I see being sold these days is the SA612AD.



If you don't need to wring every ounce of gain from these mixers
should be ok to drive them from a lower impedance source.
Some successful QRP rigs just drive them from 50 ohms single ended,
as atmospheric noise tends to predominate at HF anyway.


Jerry, KE7ER



On Sun, Dec 3, 2017 at 03:47 am, Kerr Smith wrote:

... I have chosen to use 1500 ohms but Jean-Matthieu calculations suggest 3472 ohms?
Re: BITX QSO Night, Sunday, December 3, 7pm Local Time, 7277 kHz in North America, 7177 kHz elsewhere

John P
 

On 7277 with VE3THR now! Signals aren't great, but workable!
--
John - WA2FZW
Re: BITX QSO Night, Sunday, December 3, 7pm Local Time, 7277 kHz in North America, 7177 kHz elsewhere

John P
 

Sorry, but I didn't quite make 3PM!! I'm on 7277 now. Frequency seems quiet.
--
John - WA2FZW
Re: elves are at it

 

Yup, the multiband ubitx.
Probably pretty close to the schematic shown here: ?/g/BITX20/message/33255

Jerry, KE7ER


On Sun, Dec 3, 2017 at 12:11 pm, Roy Appleton wrote:
So what is the story of these? I assume that they are a multi band ubitx??
?
Re: BITX QSO Night, Sunday, December 3, 7pm Local Time, 7277 kHz in North America, 7177 kHz elsewhere

Vince Vielhaber
 

I'm on the Kenwood on the Buzzards net/pre-net on 3929. I'll check the 40M freqs off an on thru the evening.

Vince.

On 12/03/2017 03:08 PM, Tom VE3THR wrote:
I got an amateur on AM on 7.275, the AM broadcast station also on 7.275
and another AM broadcast station on 7.285. There is all kinds of AM
broadcasts right now between 7.120 and 7.300. Another qso on 7.177.
Going to try 7.262 for a while on the Kenwood @ 2005 HRS zulu.
Good luck guys...lets try anyway.
--
Michigan VHF Corp.

Re: elves are at it

 

So what is the story of these? I assume that they are a multi band ubitx??

Roy
WA0YMH

On Dec 3, 2017 10:06 AM, "Ashhar Farhan" <farhanbox@...> wrote:
Re: BITX QSO Night, Sunday, December 3, 7pm Local Time, 7277 kHz in North America, 7177 kHz elsewhere

 

I got an amateur on AM on 7.275, the AM broadcast station also on 7.275 and another AM broadcast station on 7.285. There is all kinds of AM broadcasts right now between 7.120 and 7.300. Another qso on 7.177. Going to try 7.262 for a while on the Kenwood @ 2005 HRS zulu.
Good luck guys...lets try anyway.
Re: elves are at it

 

How about a secret pre-order process just for us? :)


Karl Heinz Kremer
PDF Acrobatics Without a Net
PDF Software Development, Training and More...




On Sun, Dec 3, 2017 at 2:59 PM, Craig Wadsworth <cwadsworth@...> wrote:
¡°It¡¯s beginning to look a lot like Christmas . . . ¡°
They look fine!? Nice work, Ash.
Re: elves are at it

 

¡°It¡¯s beginning to look a lot like Christmas . . . ¡°
They look fine! Nice work, Ash.
Re: elves are at it

philip yates
 

And me.... Santa asked me what I wanted.

Phil - G7BZD

On Sun, Dec 3, 2017 at 7:30 PM, Jorge Luiz Fenerich <py2pvt@...> wrote:
? ?Great Ashhar, do not make us suffer !!! I'm in line for one of these okay?
? Jorge PY2PVT _._

2017-12-03 14:06 GMT-02:00 Ashhar Farhan <farhanbox@...>:




--
? 73 de Jorge PY2PVT
? Campinas SP
? GG67MD
Re: elves are at it

 

? ?Great Ashhar, do not make us suffer !!! I'm in line for one of these okay?
? Jorge PY2PVT _._

2017-12-03 14:06 GMT-02:00 Ashhar Farhan <farhanbox@...>:




--
? 73 de Jorge PY2PVT
? Campinas SP
? GG67MD
Re: BITX QSO Night, Sunday, December 3, 7pm Local Time, 7277 kHz in North America, 7177 kHz elsewhere

John P
 

I still plan on being on at 3PM EST (2000 UTC) and again this evening.
--
John - WA2FZW
Re: elves are at it

 

I know what I'm getting for Christmas.
And maybe a friend or two as well.


On Sun, Dec 3, 2017 at 08:38 am, Ashhar Farhan wrote:
soon...
81921 - 81940 of 117052