开云体育

Notification for shipment event group "Exception" for 19 May EVENT CATEGORY *19 May 25 7:35 AM - Shipment is on hold - CINCINNATI HUB,UNITED STATES OF AMERICA* Noooooo.? ?Why?? ?Anyone else seen

I use this one:

I use a mini bluetooth keyboard/touchpad with my zBitx. The touchpad is a little jumpy but it works. The RealVNC viewer also works well with a laptop computer.

Dave i suggest that you get a microUSB Port extension with at least 2 USB Connections like this AuviPal 3-Port Micro USB OTG Hub... https://www.amazon.com/dp/B083WML1XB?ref=ppx_pop_mob_ap_share this

Trouble is, to swap the SD card REQUIRES disassembling the radio - at least removing the case. Not an "in the field" friendly operation. Having a proper shutdown command sent to the Raspberry Pi

Are other people not finding problems with spurious mixing spurs around 2 to 3 MHz above and below the Tx signal of your zBitx? You can listen in with any wideband SDR such as an SDRPlay or RTL-SDR

Thank you so much! I have never had an SDR QRP rig before. I’ve have TT Powermites and Argonaut 505 and 509s as well as anHW-8 and had HW-7&9. This is a whole other ballgame. I’ll probably pick up

It is not a BitX.? This link should get you started. https://github.com/threeme3/usdx

Hi Li, I have a number of devices with so-called 'real time clocks' including Teensy 4 and RasPi devices.? I end up removing the battery as some clocks emit RF ticking, and not one of them has

Given that one can set up a zBitx from the command line, one can just ssh in from anything that can connect over the network. Since most people carry a mobile phone with them when doing portable ops,

I purchased the rig in the pic from eBay about a year ago. ?The best I can remember it is a version of the Bit-X but not sure. ?I haven’t used it other than som RX because it didn’t have a

Li—you are correct. All of this GPS stuff is superfluous provided that you know your location and your real-time clock isn’t terribly terribly off. Which isn’t likely to be. And it’s easy to

I’m wondering why we would need this. Not sure about sBitx, doesn’t the zBitx have a high precision RTC with coin battery inside ? I saw some posting about a zBitx user found the battery missing

I've just received these from AliExpress, haven't tried them yet but they all look okay. The keyboard and mouse will plug into the little splitter. The power supply block 9volt? will plug into my

A Bluetooth keyboard should also work natively...

Hi Dave et all...Nice to hear from you...I hope all is well... Another fine radio from HF Signals...I downloaded the manual and gave it a quick read...Any HDMI capable TV/Monitor will work for the

Thanks, Andy! We had to deal with this a year or so back, so that we could compete in FIELD DAY with FT8/FT4 without requiring any internet.? ?There are of course many ways to "sync" these signals

Since RTCs aren't, and since many want to use their sBITX/zBITX in the field doing things that need accurate time, consider the 'guy with the Swiss accent'.

I ordered a zbitx a couple of weeks ago and I'm looking forward to using it.