开云体育

barry, Run the free -h command to see how much free memory you have. If I'm not mistaken the the OS only has 100MB of swap. You can increase it to 2GB by editing the /etc/dphys-swapfile setting. See

Yes, and debugging via this channel is better than nothing, but quite slow. I think I'll have to dig out my V2 which still has a 2GB Pi in it and see what happens. That won't happen tonight, maybe

Thanks, john, I actually haven’t used the built-in software very much yet. I do a great deal of Winlink and so I have to have an external sound interface in order to do that because there is very

Dave, this PI4 only 2GB. That might explain the problem. Barry Sent from Mail for Windows Sent: Monday, January 15, 2024 7:48 PM To: [email protected] Subject: Re: [BITX20] KBD on v3 screen

Gordon, I have a signalink that I use for FT8 with my FT-857D, and then I run WSJT-X on my laptop connected to the Signalink and the Yaesu, on nice days in the patio. Do you use the signalink with

PS: You can type: q at the (gdb) prompt to exit the debugger. -- Regards, Dave, N1AI

That makes it clear where the failure is, but not why. https://github.com/afarhan/sbitx/blob/main/sbitx_gtk.c#L1523 is the spot (in the current code, which may or may not be 100% the same as what is

Dave, I ran it again and it said “No Stack”. Same info as the picture but I did not do the bt in gdb before. Barry Sent from Mail for Windows Sent: Monday, January 15, 2024 7:03 PM To:

Glad you are up and running! -- Regards, Dave, N1AI

Dave, what I ended up with. Sent from Mail for Windows Sent: Monday, January 15, 2024 7:03 PM To: [email protected] Subject: Re: [BITX20] KBD on v3 screen

I have a V3 *board-only* kit ( no touch screen ) and have booted the sdcard it came with. Unfortunately I can't reproduce this bug using the mouse, and my V2 touch screen is not accessible right

Dave, I was able to use another linux box to image the 64gb sd card. Thanx for all the help and your patience. It works. WooHoo. Dan KD3CEU

My documentation, Instructions.pdf, on installing the sBitx software on 64-bit Raspberry Pi OS is at https://github.com/jponko/sbitx-on-64-bit You create your own image using the Raspberry imager to

The configuration suggested in my post (above) is from this site: https://k4lxycw.wixsite.com/blog/post/an-agc-or-rather-avc-for-rigs-without-one Dave, KL7HJF, Fairbanks, Alaska

Francesco, This AGC modification is on my list of projects to do. I have not installed it yet. However, I plan to use Volume Control High as input to the AGC circuit. The Photoresistor gets connected

Hi everyone. I have just received my sBitx v3 complete kit last week, and same issue with the on-screen keyboard with mine.? No updates or additions to my software as yet, so it is "as

I have to connect the VK3YE AGC to the UBITX V6. Should I modify the original VK3YE AGC circuit in order to use it with the V6 UBITX? According to Your experience, which is the best connection for

In the pi home folder, there is a hidden file .profile.? ?The last one has a command that forces the time zone to Phoenix, Arizona.? Delete that line, and the configuration you set in the

In /g/BITX20/topic/99964842#107960 I show DASH really should be called DOT since it is the signal coming from the tip of the CW jack. The software does, but I concluded my ultimate

Thank you all for the info! 73 IU6DBK [email protected]> wrote: