开云体育

Bryce, Just uploaded an instructional video on how -- if you have a spare Nano 3.0 -- you can try CDC V2 beta without risking your existing sertup. Basically, you can isntall V2 on the second Nano

Yellow toroids are usually powdered iron, not ferrite, and specifically mix #6. The toroids in the upgrade kit are not 1/2 inch; they are smaller; the wire on them makes it hard to get an accurate

Shirley, Those are 1/2 inch toroids, so FT-50 and I believe yellow is mix 43, which is good for LPF in the HF range, so FT-50-43 Can someone confirm this? Jack, N6LN

Thanks for all your work. Just ordered an SBITX yesterday, hope it gets the latest software version. Looking for to play with the new rig. Joe VE1BWV

Thanks for sharing. Just ordered a Sbitx, saw your stl's and printed a PLA silver silk version while waiting for the rig! Joe VE1BWV

I managed to drop one of those two yellow inductors in the process of finally upgrading my rig, and it skittered to places unknown. I would like the specs of it so I can replace it.

Cheers Evan.

Evan, Thanks for your reply! I believe I can accurately measure the tuning error via the CW transmit method.? Sounds like maybe the easiest thing to do is to turn on RX shift (TX shift off) and

Hi Bryce, Congratulations on a working radio! Rather than play with the tuning, now that you have a working radio, I would use the Memory Manager to try to get as close as possible to a known

Thanks Evan! I followed your advice last night and created wire antennas for the function generator and radio.? I then tuned to the zero beat frequency.? I had updated to v1.2 of KD8CEC code and

good work!

Farhan, sBitX V2 is still not available in India, please do something about it. If possible, please share pcb design files so that something can be done. Regards Ashutosh

Hi, If anyone has successfully gotten a ModMic Uni to work with Ubitx v6, I’d love to correspond with you on your set up. ?It works great on my Icom 7300, but I haven’t figured out how to make

Btw, just a side note, using a non-atomic control variable and a sleep for thread synchronization is not correct and can create undesired behaviors (apart of the inherent delay). As in some other

I was realizing that too. Thanks Ashhar!

It took me a full 24 hour nonstop sprint!

Great bug hunt Farhan!

On Wed, Jun 7, 2023 at 10:39?AM Ashhar Farhan <farhanbox@...> wrote: > Sending the before and after snaps. > - f > > On Wed, Jun 7, 2023 at 10:21?AM Ashhar Farhan via groups.io

Sending the before and after snaps. - f [email protected]> wrote:

It is called tx_stop_fixed. I have it attached in the original email