开云体育

Yes, It is an inconvenient that the PCB layout is proprietary. However, there is no obstruction to alternative layouts. I would really like to see a similarly placed, larger layout with through hole

Gerard, The uBitx is open source, and Farhan has encouraged builders to create their own versions. However, I believe the gerbers and Kicad design files for the main board have not been released.? As

I can confirm that as well. I had to search and load an older version of the tool to be able to get any of the sketches to load. I found the info somewhere on the web but I don't remember where but

Hello, I don’t know if we’re allowed to make that kind of request. I still ask the question. I made a Ubitx prototype that works very well in classic mode. (discretes components) I wanted to know

Ah yes, the 78xx series of linear voltage regulators.? If you consider the input/output voltage differential, there's quite a bit of power to sink (heat). Some have "staged" with additional voltage

Gerard, He is using a different Nextion screen program.? The Nano program is still 1.2.? You will need to find out from F5NVP the .tft file that he used to program the Nextion display. 73 Evan AC9TU

Hello, I just need a confirmation when i look his Ubitx Is the version 1.2CEC different in display when we choose the version Ubitx5 compared to the previous ones (3,4)? I found a different display

Just a hint re the Raduino. When I tried to flash mine I kept getting 500 Sync errors. Tried other Arduino boards and MOST gave the same error message. Same when using other cables and another

Your reported symptoms seem likely to be USB related, not anything Raduino per se. I've had issues with the USB connector on the Nano clone in my V3. How did you have the Raduino's Nano USB attached

I've seen issues with the AVR compiler before. I've also used newer versions of the arduino IDE with VSCode. I don't think I've seen that lint warning, though. I suspect the tool is confusing itself

An old axiom from a friend who worked designing power supply transformers and filter chokes is that if you cannot hold your fingers to the transformer and choke for a count of "thousand-one,

I put my V6 together a week or so ago and remember the 7805 on the "display unit" had a small heat radiator on it and assumed it was there because of previous comments about the heat built up on the

George, Clamp on a piece of metal or a small heat sink on it. Solves the problem. Raj

Thanks for your feedback. It may have been that RF got in there in the first place and scrambled something in the raduino? Maybe an Eprom? I had an antenna issue for a bit my doublet was touching a

It does work with old raduino and green 2 line display.? The pcb will.be plugged leaving 2 pinsextra prodided for glcd. This what i read at the first version of v6 Regards Sarma vu3zmv

Before you give it a go, take a look at both the power supply and/or possibly getting RF into the raduino. It works in SSB, right? Lighter duty. Vince. -- K8ZW http://www.metalworkingfun.com

Hi Bill, I have had a V3 for a few years and have enjoyed modding it.? Balancing output power, installing a pop fix, and other things.? I've had a new V6.2 on the air just under a month and it's a

Greetings Kit Builders and Home Breweres! Just hav recently gotten my uBITx V6. It seems to work as advertised with these two anomalies: The 7805 Regulator on the Radrino display board unit is so hot

I just got my uBITx V6 and my 7805 is very hot. Is that what prompted you to change rails? Also, the M5141 regulator on the Aurduino Nano is fed from 5 volts.? Did you change that to the new 5 volt

Mark, Very weird that GCC reports a segmentation fault, but only sometimes. My best guess would be memory errors in the host computer. Any chance you could try this on a different computer? For