开云体育

I HOPE that connection is made! Guess I'll have to bust out my meter now for peace of mind! Technically it isn't an error to the Netlist generator or the PCB routing program (not sure what tools he

you may also see another version if pcb is not a limitation. this is part no of ebay.com 261486105901

here is a link for possible supplier Of course I am not in business with

Thanks Kevin, Printed this for my BITX folder Larry WA9DOH

Hi William, Sorry I missed you tonight but as you may know W0N had a good pile-up going on. I was elated that he came back to me! I had just earlier emailed my longtime friend K9HWL that I had not

This was a great stereo diagram for an earlier build.? 73, Guy N7BIR

Pretty amazing feeling when you get a QSO on such equipment. All the credit might belong to the guy at the other end with enormous ears, but I’ll take it! Had one KH call that was able to get my

I also got Hawaii from Nevada this morning. I am running a LDG pro 2 tunner behind my Bitx 40 as well though.? KI7LOA

am still on freq

heard you in western PA , sri i tried to call back but the delay was too long... you were 4x3.... quite light....

I made contact with the Kansas QSO party. So Now I have heard and made QSL with Kansas. I also heard Calif. about 4x4 but copy.Noise level here tonight really low. 7.277.1 at 2045. Seems like all

Yay you indeed! ?Nice contact!

Good practice for noob's. It should force them to look at the board and measure where those connections to Q6 are really going. Hi. john AD5YE

The drive to the final amp is probably too high. The easiest way to adjust that is to leave the mike drive as it is, and lower the drive to the 2N2219A via R136. This automatically lowers the IRF410

Anyone notice? Farhan's diagram has Q6's Earth symbol hanging disconnected nearby :)

Francesca, you've managed to slow the tuning rate by resistors? If true, I/we'd like to know how: which value from where to where?? I'd like to slow the 'gallop' at each end of the

I meant Sunday night 7277Mhz

Here's a drawing that a member of our local BitX40 group found.? It matches those in my BitX40 builds. 3.5mm stereo plug tech data sheet

Ryan W7RLF wrote... I'm a newbie with a hot air soldering station, but I think you would find it a lot easier to remove relays using one compared to a soldering iron and wick. With the hot air tool,

7.277mhz tonight to test it out...