开云体育

Thanks Craig, we are trying always to bring some products for our community. BTW ?I am listing the case on ebay, shall drop info soon when its complete. Thanks and best regards Sunil

Thanks Ben. I have fixed it, if still you have problem kindly let me know. best of 73s Sunil

OK let me make it right. need to check site.

Try these 2 links https://cqbitx.blogspot.com ( https://cqbitx.blogspot.com ) https://cqbitx.blogspot.in ( https://cqbitx.blogspot.in ) Also check your PC clock date and time, if it is not correct

I am getting Error 404 msg when try to go to the page. wrote:

hi my bitx40 is in a plastic box with no screening. i get no problems with unwanted signals but that maybe because i live in a very thinly populated area. terry gm4dso

Further to my post, those who still want to use plastic boxes can try to glue cooking aluminium foil to the inside of the box. However, I still recommend an aluminium or steel box for screening.

Kevin, I was referring to my rig service days, I remember having problems with FT747. This type of tape comes in various widths.

Please remember that the pillars on BITX40 are NOT connected to the ground. You will need to run a thin wire from ground plane to the pillar mount pcb pads. Cheers Raj

Andy, What was the signal levels at the input of this stage. Did you compare both boards? Sent from my iPhone

Andy, 10db is a difference of about one and a half S units on receive, might not be noticed. But is a factor of 10 down in power on your wattmeter, a bit more obvious on transmit. You say the VFO

Almost all night I heard W1LY calling CQ, but when talking to someone his audio level goes down and I can't understand anything he says. Sometimes I can hear him saying the other persons call sign,

Yes, it did change - just did not see it now the msg is in the correct spot and size econjack@...> wrote:

I'm pooped...heading to bed, but will think some more on it. Jack, W8TEE To: [email protected] Sent: Sunday, June 18, 2017 11:02 PM Subject: Re: [BITX20] BITX40 TFT DISPLAY CODE - Coding A Control

Added the line - recompiled and uploaded - no change econjack@...> wrote:

Hi Raj C41 ?(I miscommuicated) is the cap going from the rf amp into the filter string, where I get a good signal on my friends board. I checked all the parts that you mentioned and every thing was

Joe: Go to line 398 which reads: ? tft.setTextSize(defaultTextSize); ? g_identifier = 0x154; and add the yellow line and see what happens to the message. Jack, W8TEE To: [email protected] Sent:

Yes, it's trying to "point" to the offending source line for the error. This message is saying that it cannot find the write_16() function. After some searching, I found that it is a macro, not a

We can use silicon RTV neutral grade for long life & flexibility . I am using it in my HF amplifiers with stands transportation jerks of the finished products even with larger toriods. Krish, vu3nkk

Yes! Just a Dab of Hot Glue works Perfect! I mean like an 1/8" dab.