开云体育

I ordered the female crimp pins, pin housings, and board-mounted male pin assembly from Tayda. ?The pins (A-837) are attached to the strip at the end, making for easy removal and insertion in the

The burned out track is from PWR1 to K1, and the spark was between the battery positive terminal and the power lead when I attached it - presumable there was a short somewhere. Matt 2E1HNK

Jonathan KK6RPX wrote... I'm still waiting for my BITX40 to arrive, hopefully this week. The case will take a bit longer. I was listening on 7277 kHz last evening. From CN88, I heard about as many

Band was weak at first, Worked W7RDB/p then a little later W1LY with 5 watts. I'm suggesting that midwest go to the 8:00 pm time instead of 7:00 pm. The band just wasn't ready at 7. Ed W0OIC

Willy you would certainly be in the lead if this was any kind of contest.? I seem to remember you posting in the past your antenna is an inverted V at 50'.? Anything else you can share about your

Worked W7RDB/p on Mt. Raney in UT QRP 2 QRP at 01:53z while he was still in daylight but he was the only west coast station heard in Rhode Island. Most difficult conditions of Sunday night BitXnet so

Jack, Thanks to your inputs the display now looks great. I thought it would be best to start another topic specific to the 2.8 inch display ID 0X1289 I went over the code several times and below is

You only need the VFO if you want to transmit or receive. Without it you're only saying HALLOOO to the board. :) Vince. -- Michigan VHF Corp. http://www.nobucks.net/ http://www.CDupe.com/

I've just added donation info and a Paypal button on my github site at https://github.com/amunters/bitx40 ( https://github.com/amunters/bitx40 ) . Your support will be greatly appreciated - Thanks! 73

HI All, Just curious how many West coasters we had on last night. Once again I only contacted WB6NPM (until recently WB0NPM). I know that KE7RTV and W7LTG were also in there but couldn't work them. I

HI All, My original BITX never "aligned" correctly. In order to get the 1 amp current draw when hallooo'ing into the mic I had to crank R136 all the way. In that way I could get 5 watts out but only

Jack just read your QRZ page. I'm quite impressed. Do you have a ling to your AGC and voice compressor circuits? Also I love the large display. Makes me wonder if I should get a case to support the

Where do I find the construction or parts layouts and software for these boards.?? Also any parts information.? I am sure there is a place but I must have missed it. 73 Dave WA5DJJ

Jack hope your ham fest was a success. Hopefully you will have time to repost the code with the if offset.? 73 Art

All of the links at https://amateurradiokits.in/store/ are 404 errors. Vince. -- Michigan VHF Corp. http://www.nobucks.net/ http://www.CDupe.com/ http://www.metalworkingfun.com

Jack, THANKS ! Well,finally found at all the spots to make the screen look normal. (1:00am - is was getting so close I could not stop) It appears text size and id are the culprits. and getting the

What happens if you add this new yellow line at line 1335 in setup(): ? g_identifier = tft.readID(); ? ?// Get TFT ID ?3.95" = 0x9486, 3.6" = 0x9488? g_identifier = 0x154; ? ? ? ? ? // Force

Mine is in a metal box, but when I'm working on it, the top is off the box and have not had any problems with excessive noise. -- John - WA2FZW

Hi Joe? This to inform that the Universal Case has been listed on our Ebay store Fusion Radio. Link below.

Its Fixed now, please inform me if still any trouble with ads etc. best of 73s Sunil