¿ªÔÆÌåÓý

Re: For Sale, uBITX V6 with TSW's Teensy 4.1 Raduino #ubitxv6 SOLD #ubitxv6


 

Wow, that was fast -- THIS HAS BEEN SOLD already.

Thank for the interest,

Jim, W0EB

------ Original Message ------
From: "Jim Sheldon" <w0eb@...>
Sent: 9/22/2021 11:24:33 AM
Subject: [BITX20] For Sale, uBITX V6 with TSW's Teensy 4.1 Raduino #ubitxv6

I have a uBITX V6 for sale that was purchased as the full kit with the factory case.? It was used for testing of the TSW (Triumvirate Skonk Worx) group's Teensy 4.1 Raduino which highly improved the operation of the V6.

This rig will come complete with an assembled, aligned & tested TSW Teensy 4.1 Raduino card, the N8DAH Kit-Projects AGC, proper USB Micro-B programming jack (replaced the Mini-B for the NANO), the USB Host Mode cable (case modified to mount it on the back panel) so a mouse and/or keyboard can be used for control of the rig and the main board has been modified to have the Hand Key jack do hand key only.? A separate jack for the Keyer Paddles is mounted through the back panel.

The latest TSW Firmware has been installed in the Teensy 4.1 and aligned properly to the radio's IF and master oscillator.? In USB/LSB and CW, the displayed frequency IS the transmit carrier frequency so CW operates properly.? The CW keyer operates automatically in Hand Key mode (front panel jack) or Key Paddle mode (rear panel jack) either can be used interchangeably (assuming the keys are plugged in) without doing anything except using the desired key.? No menu changes are needed for this.? Since Push to talk is not used in CW and the keys are not used in SSB, the PTT line is used for the hand key keying line.? This allows the PTT button on the microphone to be used as an emergency hand key if the need arises when in the field.

An original factory Raduino card less the display (which was used with the T4.1 card) will be included but only because it originally came with the radio. Also, printed manuals will be included for the firmware and the Teensy 4.1 Raduino hardware.? The uBITX V6 schematics, etc. will have to be downloaded from the HF Signals website as you normally have to do with a new rig from them.

Asking price is $200 plus $20 shipping & insurance to the USA only. It will be shipped Priority Mail. ? I'd prefer not to go through the customs/export hassle to ship overseas and shipping would be quite a bit more expensive so again, this is offered in the USA only.

PayPal only.? If interested please email me (w0eb (at) cox dot net) and we can go over the details.

Jim Sheldon, W0EB

Rear Panel showing the modifications for HOST mode and the CW Paddle jack. Label is easily removed.




Display is a lot sharper than in the photo.? My lousy photography - sorry

Join [email protected] to automatically receive all group messages.