I seen another person on here had a similar problem and he tapped it and it worked.
I have tired tapping the relay and it will reset. when that doesn't work I key the mic or the key and turn radio off then back on it seems to work.
Evan It happens with ssb or cw.
When I first turn it on it work for a while but then it will happen.
the radio is working normal in the beginning then there nothing come over the speaker when i unkey the mike or key. if I keep keying the mike the watt meter shows output. but there is no receive signal.
I running v1.20 on the the display.and I set the tx rx delay to 1.
yes the radio worked fine. I was concerned when it heated up I was doing some cw but it seem to work proper, I have over 200 contacts logged in FT8.
