Sunil,
I'm convinced you have a solid product that works well.
It fills a need, as HFSignals no longer sells a single band rig.
Experimentation is encouraged, and I rather enjoy trying to figure out
these puzzles when problems arise.? Long distance troubleshooting
works best when all pertinent information is provided.
When mods to a kit cause it to not work correctly, that in no way
suggests that the kit was bad.
Jerry, KE7ER
toggle quoted message
Show quoted text
On Wed, May 19, 2021 at 06:58 PM, Sunil Lakhani wrote:
Jerry we provide a working DDS unit using si5351 which is tested with Freq counter .?
Now If any one has doubt on the DDS he is supposed to check the Freq output of vfo and bfo . Out here the builder preferred to port code from other sketch?
We provide help In a framework as per our manual .we do not know if someone is experimenting and what he is doing and it becomes difficult to provide support.
The problem comes when you have a conflict where you decide what is right and overlook what has been used for years as a standard design and components.
When a person has achieved some breakthrough with his effort he should illustrate it with proof,but not try to alter and find faults in a tested design .
We started our kits a decade back with bitx version 3. Then bitx version 3b. Later bitx version 3c using ade 1 and bitx3c using sbl mixers which were build by many hams worldwide all had the basic bitx design.
The present easy bitx is the latest kit with much better performance and PCB layout . Better audio amp .audio mute.agc etc .
If one goes to our cqbitx blog he could see pictures of so many bitx version 3 build by amateurs world wide .
Thanks and regards.
I am thankful to all members of this wonderful vgriuo who provide a constant support .
De
Sunil vu3sua
