Allard's code is a very good starting place if you wish to create your own version
of firmware for the Easy Bitx.
But I have absolutely no idea what you are doing.
>? The one by? Allard Munters PE1NWL is taken from GIT
>? No such errors with this FW...any way...? :)
From this, it sounds like you may have it working.
If so, congratulations!
I guess we're done here!
If you are still having trouble the the BFO moving:
Are you using an Easy Bitx kit that you bought from Sunil, or are you building from scratch?
Are you using the Si5351 BFO VFO board supplied by Sunil?
When you compiled his Sunil's code, did you use exactly the same version
of the Si5351 library that Sunil used?
What frequencies are you seeing on the scope for BFO and VFO,
and how do they change as you attempt to tune from 14.3 down to 14.0mhz?
Jerry, KE7ER
toggle quoted message
Show quoted text
On Wed, May 19, 2021 at 09:41 AM, <arorasimran@...> wrote:
Jerry! I have the stock firmware sent by sunil which with wish the board was flashed ! VFO and BFO issues are arising in the stock firmware supplied by sunil
The one by? Allard Munters PE1NWL is taken from GIT
No such errors with this FW...any way...
:)
