Already read it is because of the LPF in the output. Has anyone already
modified the ubitx v6 to optimize for the 5 to 6MHz range for civil HF use?
Rafael
toggle quoted message
Show quoted text
On 1/5/21 10:49 PM, Rafael Diniz wrote:
Thanks Rafael!
Btw, I noticed I get zero output on 6.9MHz, and full power on 7100. Why?
Rafael PU2UIT
On 1/5/21 10:23 PM, rafaelgcpp@... wrote:
For radio audio out to pc line in, a stereo cable will do. On the
other way around use two stereo plugs but leave the mid section of the
plug disconnected. The mid section on the mic input is the PTT, hence
a mono plug will put the radio in tx continuously. Using a regular
stereo cable can lead to erratic behavior, as the radio will
understand some low voltage as PTT pressed.
