¿ªÔÆÌåÓý

  1. BITX20
  2. Messages
Single Messages Topics Expanded Polls

Re: Ver3 to CEC

 

Hi

Thanks for the revert. I use the standard lcd display which comes with the box.

Have uploadrd the corresponding hex files as well.

But still the display does not light up.

Since I have ver3 running currently, ehich is the manager for it. Ver .97 and 1.11 dont seem to be able to read the stock raduino.

On Sun, 5 Jul 2020, 23:53 MVS Sarma, <mvssarma@...> wrote:
Rajesh, did youbuse nextion or 16*2 lcd ?

?Eitherway you have to configure it in ubitx.h file before really uplading. I assume you might have done it.? However try to check . All the best.?
Sarma vu3zmv

On Sun, 5 Jul 2020, 11:27 pm rajesh huddar, <pumerah@...> wrote:
Hi Evan,

Changed baud rate, could read the Nano.
Loaded the display files through the XLoader.
Loaded the CEC software ver 1.20. Compiled and uploaded. Again read it in the manager with the baud rate suggested. Read successfully.

Then tried to connect it in the box. Switched on and no display.

What could be the?problem?

The stock raduino which I have does not et read by manager 1.11 and 0.97. Is there any version which can read ver3 software. Tried all the baud rates.
Join [email protected] to automatically receive all group messages.