On Jan 6, 2020, at 11:01 AM, Ashhar Farhan <farhanbox@...> wrote:

?

The changes have been pushed. The new boards will have the fixes.

- f

On Mon 6 Jan, 2020, 7:43 PM Jim Sheldon, <w0eb@...> wrote:

Erwin Serle,

Did you not read my posts all the way.? I thought that was what I said the person should do.? Besides, KD8CEC and Nextions don't work with the V6 Raduino which uses an ILI9341 TFT Touch screen display, NOT a NEXTION as it comes from the factory.

Jim Sheldon

------ Original Message ------

From: "Erwin Serlé via Groups.Io" <waterwin2@...>

To: [email protected]

Sent: 1/6/2020 6:02:37 AM

Subject: Re: [BITX20] UBITX6 Will Not Select 17 Meters

@Jim Sheldon, in this case it would be advisable to read and note the original calibration settings before doing the actual install of a new firmware.

Also as far as I understood the findings of KD8CEC a new firmware does not change the stored calibration values.

The KD8CEC Memory Manager software could be used to read the original values before doing any changes.

--
PE3ES - F4VTQ - Erwin
73