Re: UBITX6 Will Not Select 17 Meters
|
The changes have been pushed. The new boards will have the fixes.
- f
On Mon 6 Jan, 2020, 7:43 PM Jim Sheldon, < w0eb@...> wrote: Erwin Serle, Did you not read my posts all the way.? I thought that was what I said the person should do.? Besides, KD8CEC and Nextions don't work with the V6 Raduino which uses an ILI9341 TFT Touch screen display, NOT a NEXTION as it comes from the factory.
Jim Sheldon
------ Original Message ------
Sent: 1/6/2020 6:02:37 AM
Subject: Re: [BITX20] UBITX6 Will Not Select 17 Meters
@Jim Sheldon, in this case it would be advisable to read and note the original calibration settings before doing the actual install of a new firmware.
Also as far as I understood the findings of KD8CEC a new firmware does not change the stored calibration values.
The KD8CEC Memory Manager software could be used to read the original values before doing any changes.
--
PE3ES - F4VTQ - Erwin
73
|
