Re: Is there a Raduino replacement with supply voltage, FWD & REF readings ?
|
Thanks I'm using the resistors that came with the kit. At 81 I think I'm Loosing It. 73 Jim
----- Original Message ----- From: Michael Hagen via Groups.Io <motdog@...> To: [email protected]Sent: Thu, 12 Sep 2019 12:03:27 -0400 (EDT) Subject: Re: [BITX20] Is there a Raduino replacement with supply voltage, FWD & REF readings ?
Relay K1 has 12v
connected to Tx or Rx.?? You can get it off the schematic
anywhere Tx or Rx is connected.
Use a current limiting
resistor for Led indicators. Mike, WA6ISP
On 9/12/2019 8:46 AM, James Baird
wrote:
Can someone Please tell me where the TX-RX on the LED hooks
up on the uBITX Board? Thanks?? Jim Baird W5OMM HOT IN TEXAS
----- Original Message -----
From: Razvan Fatu <razvanfatu@...>
To: [email protected]
Sent: Thu, 12 Sep 2019 06:45:53 -0400 (EDT)
Subject: Re: [BITX20] Is there a Raduino replacement with supply voltage, FWD & REF readings ?
Thank you for the replies.
I've looked at the CEC and JackAl expansions, they are nice
but add unnecessary complexity for this specific purpose and
neither seems to have all these minor but specific features I'm
looking for. Looking for a "less is more" approach if possible.
@ John, thank you for all the information, that's very close
to what I'm looking for. I like the way you use the limited
display area, I think this is quite close to what I need. I need
to spend a bit of time on it.
Razvan M0HZH
--
Mike Hagen, WA6ISP
10917 Bryant Street
Yucaipa, Ca. 92399
(909) 918-0058
PayPal ID "MotDog@..."Mike@...
|
