I uploaded a spreadsheet of my measurements for my ubitx for 80,40,30,20, and 10m:
? 1. Stock
? 2. Replaced L5/L7 with SMD inductors I found locally, kept C211 in circuit
? 3. Replaced the relays
? 4. Replaced the inductors with the specified Murata parts
? 5. Bypassed C211 per the mod
The mods I used:?
Both helped.
To desolder the relays, I used a piece of desoldering stick,
a low temp alloy along with solder wick and a hot
tip on the iron, made easy work of it.? Cleanup was the worst bit.
Probably about the same as:
I'll probably put the cap back in the circuit to get 30m.
I still need to find a solution for 80m.
