uBITX for sale $67
|
Jon Titus, KZ1G
uBITX transceiver for sale.? I built the radio but didn't use it beyond a few quick CW QSOs.? Unfortunately it's unlikely I'll use it again.? Well packaged and shipped in the USA.? Transceiver and shipping via UPS or USPS, $67 total.? Documentation included.? Paypal only: jontitus@....? (See photos.)
This transceiver includes a 4-line LCD and programmed Arduino module for the RadI2Cino (Radio-I2C-Arduino) modifications.? (Documentation included.)? I installed this and it works.? This mod includes a different controller board, but you can revert to the original configuration if you wish.? I'll include the original plug-in control module, 2-line LCD, and the Arduino module so you can go back to the original configuration if you wish. The transceiver comes mounted on a wooden board with clear plastic front and rear panels.? You can use the radio as-is or put it in a case of your choice.? Instead of using the pushbutton in the incremental encoder rotary control I added a separate high-quality pushbutton.? The RadI2Cino modification required a second pushbutton for the VFO selection (A/B/Split). I removed the transmit/receive relay and replaced it with a front-panel switch.? Two small LEDs indicate the status (red-transmit and green, receive).? I'll include this relay in case you want to use it instead of the switch.? My front panel includes an SPDT switch for power, but I didn't connect it. -- Jon Titus, KZ1G Herriman, UT USA |
