here is a picture - of course out of focus
On Thu, Dec 20, 2018 at 2:20 PM MVS Sarma via Groups.Io <mvssarma=
[email protected]> wrote:
Very simple.
take a mini? nose plier or tweezer.
Apply the tool on these two pins and covering few normal pins and? try bending the.
And? they restore.
On Thu, Dec 20, 2018 at 2:07 PM <
pa1cjt@...> wrote:
Goodmorning dear OM's and builders of the uBitX transceiver,
?
I recently bought the uBitX and looking at the components I noticed that some pins of the Raduino board are bent. I do not know if that has been done for a reason or just by accident. I would get confirmation that these bent pins needs to be bent or to be adjusted before putting the radio together. I can imagine that all should be placed in the connector on the main board. The pins are bent in a way that they could never fit in the connector.
The bent pins are those on the lefthand side when you look from the front of the radio.
The picture below shows how i received the board. I guess it needs to be corrected but perhaps someone can help me.
