开云体育

  1. BITX20
  2. Messages
Single Messages Topics Expanded Polls

Re: Simple spur fix

 

Hi Joe,

I am not sure what you used to replace L5 and L7. I tried

Coilcraft air coil - terrible spurs worse than stock.
Shielded Coilcraft - much better and almost same as the stock
1206 size ferrite one - big loss of signal and power
1210 yellow one marked S+M - slight loss of signal and power (about 0.5W on 40)

Assorted


Mine looks like this


I have ordered the assorted to check if it works the same as my China assorted pack.

Send me a pic of what you put to vu2zap @ gmail.com and let me see what they are!
or whats app to number below.

Raj
+919483843939

At 23-10-18, you wrote:
Hi Raj, I Replaced L5 and L7 and by observing my waterfall on the panadapter I installed and comparing it to my commercial rig it seems like the receiver is not as sensitive as before. Even the circuit I抦 feeding for A7 for signal streghtn is not hitting as expected on strong signal. It抯 a !ittle weaker then before.

I bascially took the 45mhz 2nd filter that I added back out put a through hole 47ohm back in its place. I didn抰 have smd. Is also don抰 have any good test equipment so I can抰 tell you much but I was wondering, Raj if you noticing a slight loss in receive with the mod?

Joe
Join [email protected] to automatically receive all group messages.