开云体育

Hi Chuck, indeed I was thinking with the logic of building wideband transmission line transformers which cannot be easily built with such a high transformation ratio. As far as I understand you would put the capacitor at the antenna side. If I wanted to put the capacitor on the low impedance side , let's say at 10Mhz, what would you do? Which value of reactance should be on the low side?

Il 27/ago/2018 03:55, "Chuck, N1KGY" <cwayers12@...> ha scritto:

Tom

When you measure VSWR you are measuring reflected power. The less reflected power, the lower the indicated VSWR. When you measure a transformer (or attenuator, or feedline, or any circuit element) with 100% loss, there is no measured reflected power. All of the forward power is absorbed by the circuit element and none is reflected. A VSWR bridge sees no reflected power and reports VSWR = 1:1.

WA8TOD