¿ªÔÆÌåÓý

  1. BITX20
  2. Messages
Single Messages Topics Expanded Polls

Re: NEXTION UPDATES FOR 7 AND 5 INCH - --ADAPTED FOR KD8CEC VER 1.095

 

Pat,

I am no expert, but I have 3 nextion displays 3.2E and 7 inch.

I have never seen? that type of picture displayed on any of them .
It looks faulty.

What is your power source for the 7 inch??
I run my 7 inch on its own wall 5v 2a power supply

Joe
ve1bwv


On Sat, Jul 14, 2018 at 8:11 AM pat griffin <patgriffin@...> wrote:

Joe,

I downloaded your code and yesterday the 7in Nextion arrived just in time for the weekend.? But, I get the attached image whether booting with an SD card or not and the Nextion IDE cannot connect to the display if trying to upload.? I have used these same procedures with the Nextion 2.4 and 2.8 with no problems.? Looks like a bad display to me.? What do you think?

Thanks,

Pat AA4PG


Pat Griffin
From: [email protected] <[email protected]> on behalf of Joe <joeman2116@...>
Sent: Monday, July 9, 2018 6:07:51 PM
To: [email protected]
Subject: Re: [BITX20] NEXTION UPDATES FOR 7 AND 5 INCH - --ADAPTED FOR KD8CEC VER 1.095
?
Vern, I usually attached both files..
See attached? - newest 7 inch for non E version. It will work fine on your 7 inch E version
You will be able to compile , just select your display type and size then compile to get your ,tft
It says test only because it has my latest changes as of this morning.
If you have any issue I can compile and send the tft for the non E version as well.
Let me know how it works

Joe
VE1BWV

Join [email protected] to automatically receive all group messages.