I have one of Sunil's cases and was looking at a way to use a Nextion without major butchering of the nice case. The 2.4" that I have looks like it might just barely fit...I measured the height of the display as about 43mm and the distance from the top edge of the front panel to the top of the jack labels is about 48mm. The 3.2" display is about 47mm high. Looks like either might fit but it would be close, if you don;t want to cover up the labels. A bezel would add some to the size of the display.
I have a second uBitX waiting to be assembled. I think I'll leave the first one in Sunil's case with the 16x2 display (altho I swapped it for white-on-blue version that I like better) and build the second one into another case that I can set up the way I like it.
Also, I believe that Sunil is planning to offer cases cut for some of the Nextion displays but I don't know how far along he is with that. Maybe he'll chime in here with more info.
Anyway, just some info that may be of use.
(We might want to start a new thread about this.)
Mark AA7TA
toggle quoted message
Show quoted text
On 7/10/18 7:20 PM, Richard Spohn wrote:
Thanks Joe. I think the size of my display then, will depend on how
much space there is on the panel...I bought one of Sunil's cases, and
now I'm thinking I could mount the correct size of Nextion in a bezel
with bolts mounted on the back that are spaced to hold the Nextion to
the front of the case, covering the hole in it that was meant for the
16x2. That could work pretty nicely. ...
