¿ªÔÆÌåÓý

  1. BITX20
  2. Messages
Single Messages Topics Expanded Polls

Re: KD8CEC Firmware

 

No mods required to add a nextion display.
Only requires +5volts and gnd for power.
Two wires for connection to connector where old displayed plugged into.
The firmware must be the version which supports Nextion Displays.

Joe
VE1BWV

On Fri, Jun 22, 2018, 7:13 PM Charlie Morrison <charlie@...> wrote:

Michael

?

I have also ordered a Nextion 2.8 display, but to run KD8CEC firmware, do I need to do any mods to the Ubitx? Thinking here of the CW side of things or does it implement the 2 resistor solution for paddles?

?

73 de Charlie GI4FUE

?

From: [email protected] [mailto:[email protected]] On Behalf Of Michael Babineau
Sent: 22 June 2018 14:30
To: [email protected]
Subject: Re: [BITX20] KD8CEC Firmware

?

Terence :?

After you get the KD8CEC firmware loaded I recommend that you also install his uBITX Memory Manager application on your PC.?

One very useful feature is the ability to read and decode the current data/settings from the Raduino and save them to a file on your?
computer.? I recommend doing this right away before using it to modify any settings so that you have a baseline to return to should?
something get messed up later. This is especially important if you decide to try recalibration.

Cheers

Michael VE3WMB?

P.S. I got my Nextion 2.8" TFT Display so when a get some time this weekend I plan to move to KD8CEC V1.09b and give that I try.
I think that this display is going to be a "game changer" for this rig.?

?

Virus-free.

?
Join [email protected] to automatically receive all group messages.