What's not seen and didn't make a difference to pop/thump was I removed k3 from the audio path
(K3 contacts 1,3,5) so I could use them to ground the RX path during TX and use K1 to switch
the antenna and Q90 to the output/input of the 30mhz low pass filter.? This relieves the filter
and receiver of Q90 base resistor (100 ohms) from the path on RX and helps improve sensitivity.
There are many mods most will not do or feel are not needed for them.? Most of what I am doing
are to suit my wishes eclectic as they may be.
Allison
