Ralph,
This is how many people suggest doing the ARRL frequency measurement
test.
tim ab0wr
On Thu, 31 May 2018 18:14:42 -0400
"Ralph Mowery" <rmowery42@...> wrote:
The tuning is close for those that do not have test equipment.
What I usually do is set a sideband rig readout either 1000 hz higher
or lower than the desired frequency depending on the sideband . Then
feed it a signal that is on frequency and put a counter on the
speaker. When the speaker output is 1000 hz, then the receiver is
set. No guessing about trying to hear the zero beat below around 100
hz or less.
