Hi folks,
I'd like to offer up for sale my Ubitx installed in one of Sunil's (Inkit) black enclosures. The radio is running the latest released version of the CEC firmware and has been modified per Ashar's latest message to increase the output power. I also added a three pin jack to connect to the front panel RX/TX LED.
All of the jacks and knobs in the front panel are wired up and working and the USB port on the back of the enclosure is also hooked up to the Raduino so there is no need to open the enclosure to update firmware or use CAT control. The DB9 and two 3.5mm jacks on the rear panel are not connected.
Included is a modified Yaesu speaker microphone as pictured and the power cable.
I've made a few QSOs on 40m, 20m and 10m and have received favorable reports.
I'm hoping to recover what I've put into it cost wise minus my labor to install and calibrate, so asking for $150. I would prefer to ship within the USA to avoid hassles with custom's paperwork and the such.
If anyone is interested please let me know, either send me a PM or an email to noelacramosATgmail.com (replace AT with @).
Thanks!
73's! Noel, W1NCR
