On Thu, Apr 26, 2018 at 06:52 am, <davesters@...> wrote:
I like this version of the firmware. I put in switch to calibrate the frequency, no more poking a bare wire into the power supply connection. I also added a function switch.
Glad you like the software!
Actually with this software you no longer need the red 'calibrate' wire (or switch) at all. The same calibrate function can also be accessed via the SETTINGS menu (keep the Function Button pressed for 3 seconds):
?? SETTINGS menu:
?? 1 short press: Set the 4 scan parameters (lower limit, upper limit, step size, step delay)
?? 2 short presses: Set the 6 CW parameters (key type, auto-space, touch sensitivity, semi-QSK on/off, QSK delay, sidetone pitch)
?? 3 short presses: LSB calibration?? 4 short presses: USB calibration?? 5 short presses: Set VFO drive level in LSB mode
?? 6 short presses: Set VFO drive level in USB mode
?? 7 short presses: Set tuning range parameters (minimum dial frequency, max dial freq, tuning pot span)
?? long press: exit SETTINGS menu - go back to NORMAL menu
73 Allard PE1NWL
Allard PE1NWL