Re: KD8CEC software CW Question
|
Hi All,
Here is another option to add paddle key to same port straight key.? by soldering resister 10k & 2.2k to stereo jack.
73 de E29AHU Choke
On Thu, Apr 5, 2018 at 11:24 AM, K5ESS <k5ess.nothdurft@...> wrote: This should show how the paddle and straight key are wired. (standard dot-dash paddle connections) ? 
? I don’t understand the comment that the resistors should be at the paddle end of the connection.? Maybe someone can educate me.? Mike K5ESS ? From: [email protected] [mailto:[email protected]] On Behalf Of Bill Carpenter
Sent: Wednesday, April 4, 2018 8:46 PM
To: [email protected]
Subject: Re: [BITX20] KD8CEC software CW Question ? So, the 4.7K is removed and the 2.2K is soldered there with the 10K on the Ring?? Also, even though I use my right hand I work a paddle backwards - dots on my thumb (left paddle) and dits on my forefinger (left paddle).? I didn't know the "convention" when I got my first set of paddles so I just hooked them up, backwards by accident, and learned that way.? So I guess I need to put the 2.2K on the ring and the 10K on the tip as I see no software "paddle reverse".? Will that work OK?
|
