I faintly disagree.??
Might work, but you are better off moving the VFO and the BFO, not clk1 and the BFO.
If moving clk1, you change where the signal we extract is hitting the 45mhz filter.
Faintly, because the 45mhz filter is wider than the 12mhz filter.
Though not terribly wide, and probably not terribly flat either.
? ??
Moving the VFO is just as easy as moving clk1, and should give at least marginally
better results.
Jerry, KE7ER?
toggle quoted message
Show quoted text
On Sun, Mar 11, 2018 at 08:12 am, Tim Gorman wrote:
You could do the IF Shift by
changing CLK1 in order to shift where the signal impacts the 12Mhz
passband of the SSB filter but CLK0 would still have to maintain the
same relationship to CLK2 in order to demodulate the signal properly.
