¿ªÔÆÌåÓý

  1. BITX20
  2. Messages
Single Messages Topics Expanded Polls

Re: Board won¡¯t power up.

 

Bruce,

Check the voltages with your -ve probe on the mother board. In case there is a ground fault in P1 or wire!

Raj

At 11-03-18, you wrote:
I think my microBitx main board may be defective. When powered up (without the raduino attached), according to the wiring instructions, it only draws 60-80 micro amps, rather than 90-110 mA the instructions specify. I have checked twice that the sacrificial diode is installed correctly.

Any ideas how to proceed?

Thanks,

Bruce W1BWA
Join [email protected] to automatically receive all group messages.