Re: CAT Support uBITX Firmware CEC Version 1.04 Release

Ian Lee All Messages By This Member #43818 David Thanks for feedback In the uBITX Manager, setting the BFO value to 0 is the factory default value. If the problem is solved by moving the frequency, try adjusting the Master Calibration rather than the BFO. How to set Master Clibration and BFO Calibration is same as original source. uBITX Manager has a function to backup setting values.?It is better to back up when adjusting the calibration. Ian KD8CEC 2018-03-07 0:05 GMT+09:00 N8DAH <Dherron@...>: toggle quoted message Show quoted text Just loaded the Software and love it tested cat works 100%! My only issue (more the radio then software) the pitch of the RX is insanely high, in the ubitx manager where would I tweak the BFO to get the audio tone to lower a bit. At this time it sounds like a tin can but worse. -- David ?N8DAH -- Best 73 KD8CEC / Ph.D ian lee kd8cec@... (my blog)

Join [email protected] to automatically receive all group messages.

开云体育