Will any of these packages that have been mentioned do automatic routing? Or are you required to do all the runs manually?
Vince.
toggle quoted message
Show quoted text
On 03/01/2018 10:12 AM, Michael Hagen wrote:
Lt Spice is a circuit simulator. Not for Layout of PCBs. Use one of
the online PCB programs folks have been discussing here on the group.
Look back through the posts on PCB Layout Software. Any of them will
require a learning curve.
For instance, that circuit uses some small SCRs. Not a real popular
part, you might get to make the Model (s).
There is a schematic model and its matching PCB model. Start with the
schematic program and create a nice schematic before going to PCB. It
will transfer its connections (netlist) to you PCB. It will find many
mistakes (inconsistancies between schematic and layout). If you are
real careful, you can make PCBs that are correct the first time!
PCB layout is Really Fun! Better than crossword puzzles.
73's
Mike, WA6ISP
On 3/1/2018 4:33 AM, Walter wrote:
If I wranted to build a circuit like this one is there a software to
help me layout a perfboard for the circuit. I have LTSpice but I
don't see anything to layout a perf board in it. It just may be that I
don't know where that feature is in the software.
--
73, W9KJO
Walter
--
Mike Hagen, WA6ISP
10917 Bryant Street
Yucaipa, Ca. 92399
(909) 918-0058
PayPal ID "MotDog@..."
Mike@...
--
Michigan VHF Corp.
