The caps in the si5351 clock lines are definitely required.
If soldering the adafruit board in permanently, could use small through-hole caps instead of header pins.
If socketing the adafruit board, then cut traces from the adafruit socket to the right angle uBitx header
on this new board and insert the caps there.
toggle quoted message
Show quoted text
On Sun, Feb 25, 2018 at 07:28 am, LKNDAVE wrote:
i noticed this board and the original raduino are different in the fact that the .1uf cap on the 3 clock lines are missing. the adafruit brreakout does not have them.
just an observation
dave
