Re: BITX40: Allard's Firmware with Rotary Encoder?
|
Ryan:
See if the attached encoder article is of any help. It should at least get you started playing around with the encoder.
Jack, W8TEE
From: Ryan Flowers <geocrasher@...>
To: [email protected]
Sent: Friday, February 16, 2018 2:56 AM
Subject: [BITX20] BITX40: Allard's Firmware with Rotary Encoder?
Hello All,
I got Allard's Raduino sketch to compile on an Uno R3 that I'm playing with, and I also got a rotary encoder working on a test sketch, and now I need to figure out how to make Allard's sketch use the rotary encoder. I'm pretty new to Arduino (this is my first actual project aside from Blink and a few basic tests). I've figured out how to convert to an I2C display- that's easy enough, and I have a version of the sketch that does that successfully. I must be humble and admit that I don't have the time I wish I did, and I'd be better off if someone already figured out the encoder part so I could get a jump on that. I have other mods that I want to do, but Allard's code is so well featured I'd?like to start there, if possible.
Thanks for the assist and 73!
--
Ryan Flowers - W7RLF
|
