Jason.
Thanks for your information.
Can you send me your settings?
If you send me the set value, I will test it together.
CW Speed (5th Menu),
CW TX-> RX Delay (5th Extra Menu),
CW Start Delay (6th Extra Menu)
CW KeyType (7th Extra Menu)
---------------------------------------------------
Please ask for the test as shown below.
CW Start Delay: 0?
? This is because the key value can be lost because the key and TX start at the same time. According to Beta tester, 20ms is optimal, however which differs from user to user. Setting it 0 up will make you feel like before.
? ?When using an external device such as a linear amplifier, it is better to increase the value.
CW Speed : 12~25 (you want)
CW TX-RX Delay : 600 (May be default value)
CW Key Type : IAMBICA or IAMBICB
-------------------------------------------------
Additional Information
Version 1.01 can be used with all resistors.?
By default, it is set to the range specified in 10K, 2.2K resistor and original source.
If only CW Key type is selected in the menu, you can use Paddle or Straight key.
I recommend that you use the ADC Monitoring function in Version 1.01 to make a note of the exact ADC value of Dot and Dash.
And adjusting the ADC value range of the CW Paddle in the uBITX Manager will probably be much better.
Ian KD8CEC
