Hello,
Who is the member of this group that has the bad uBitx with all the relay/other issues? Please contact me about your uBitx. I have a new in the box uBitx I might be will to swap for you damaged one, but I need to know what shape it’s in physically.
After all these posts you seem to be getting nowhere and I hate to see problems like this unresolved, no strings or catch I haven’t built mine and you could use it more than me at the moment.
toggle quoted message
Show quoted text
On Jan 30, 2018, at 13:18, K5ESS <
k5ess.nothdurft@...> wrote:
The pin numbering on these relays is inconsistent? i.e. reversed in some cases. Either will work OK by taking this into consideration.
Mike
K5ESS
?
From: [email protected] [mailto:[email protected]] On Behalf Of David Beal
Sent: Tuesday, January 30, 2018 9:36 AM
To: [email protected]
Subject: Re: [BITX20] uBITX woes, feeling disheartened.
?
Hi Nick,?
I got the same relay and am equally confused as the pinout for both the original relay (Virtual) and this replacement (Panasonic) appears to be the same (across 1/16 on both pinouts); yet the schematic shows the coil across pin 8/9 per:??/g/BITX20/message/40439
Oddly, the data sheet for this relay which I posted here:?/g/BITX20/message/40440? is no longer available.??
Further, this post:??/g/BITX20/message/26983? indicates coil across 1/16 also.?
I'm going to disconnect PA power this weekend and use an ohm meter to trace through the relays per someone else's suggestion.??
Dave
--
Dave Beal
AE6RQ
James Lawrie