My first run uBitx came with two 8 pin harnesses, plus a 3 and a 2, appropriately enough.
The Bitx40 had a 5 pin harness, but no 7 pin harness.
Wonder where some 7 pin headers slipped into the mix, perhaps the vendor to hfsignals?
Could be that a bunch of uBitx kits went out with the wrong harness.
If others wind up with 7 pin harnesses in their kit, here's how to deal with it:
Audio 8 pin connector into the uBitx main board can skip the ground at pin 8, plenty of other grounds.
Likewise, the Raduino 8 pin connector could do without A7 at pin 1, which is a "spare" in Farhan's code.
Have to shave off the plastic keying guide on one end of the harness connector,
note that it's a different end to be butchered on the two connectors.
toggle quoted message
Show quoted text
On Tue, Jan 30, 2018 at 11:50 am, Arvo KD9HLC wrote:
So I'm piddling away with the ?B parts as I work out details for my case and stuff, and I can't get the audio connector on.? After an exhaustive investigation, I resort to counting.
The connectors on the board have eight pins, and the harnesses have seven holes.
