Re: How to order Raduino board?
|
100 I/O pins on the Mega Pro??
Jack, W8TEE
From: Michael Hagen <motdog@...>
To: [email protected]
Sent: Wednesday, January 17, 2018 4:09 PM
Subject: Re: [BITX20] How to order Raduino board?
I have the Better
RaduinoX PCB that lots on this list have bought stuffed and
bare.
It is much better.? I
am on the second batch of 50 PCBs.? So a lot have been built.
The USB is better
placed, the Nano Plugs in.? The regulator has capacitors,
diode, and dropping resistor.
You can fit a heat
sink too.
The I2C is level
shifted properly to the SI5351 Clock Gererator.? Per SI data
sheet.
I have a bigger version
that uses a Mega Pro (256K and 100 I/O pins).
Bare boards are $10
including Shipping US and PayPal.
Mike, WA6ISP
On 1/17/2018 12:51 PM, Vic WA4THR via
Groups.Io wrote:
Where
can I order a bare Raduino board for the BitX40? I have the
display that is fine, but I may have a problem with the Raduino
board itself and would like to see if it is possible to replace
it.
=Vic=
--
Mike Hagen, WA6ISP
10917 Bryant Street
Yucaipa, Ca. 92399
(909) 918-0058
PayPal ID "MotDog@..."
Mike@...
|
