I'd hope your capacitors had numbers and letters printed on them! Please tell us those. .22pF is mighty small - is that decimal point a fly-spot? That would give you 2x22=44pF, 1.10 the required value. I'd suggest a trip to your nearest vendor or dive into your junkbox or online with a few days' wait for the proper value. There's nothing critical to the value in this position +/- 10%, and no temperature sensitivity - NPO, PTC, NTC, disc ceramic or mica, if it'll fit on the board (or with reasonably short leads) it'll do the job. I've had resistors lift like that and replaced with the smallest axials I could find, standing up? with about 2mm of bend to the leads for the pads. Works fine. Good luck!
73
Dex, ZL2DEX
