From:[email protected] <[email protected]> on behalf of D. Daniel McGlothin KB3MUN <kb3mun@...> Sent: Saturday, December 30, 2017 11:55 PM To:[email protected] Subject: Re: [BITX20] #bitx40 #parts need spec's on BITX40 capacitor C7
?
Thanks for the info.
My typo, I used a pair of .22 pF for .44pF (closes I could get).? Your right is doesn't work too well, although I could hear a a QSO around 7.3 MHz.
Thanks again,
Daniel KB3MUN
On 12/30/2017 23:26, Jerry Gaffke via Groups.Io wrote:
470pf? in an NPO or C0G or silver mica would be ideal.
Voltages there are quite low, less than 5v, so most any voltage rating.
> I've temporarily repaired with a pair of .22uF in parallel.
That would give you 0.44uF, which is 440000pF.?
Not good, I'd be surprised if it worked at all.
On Sat, Dec 30, 2017 at 08:07 pm, D. Daniel McGlothin KB3MUN wrote:
I need part specification for BITX40 capacitor C7. I know it is a 470 pF. Is it an NPO? what voltage rating?
