Re: #Bitx40 Firmware update issues

Jeffrey Peters #37600 Thank You Al - VE3RRD, I had to update my Arduino IDE on my netbook, I then followed your instructions at the link provided.? I now have a Bitx40 that is receiving and transmitting on LSB with V1.27.3 Thank you very much! Now, I will need to read and learn how function button works.? I was able to change the scanning function. I was able to switch modes from LSB to CW.? Changed some of the settings (scan) and CW.? I set those functions I think?? After making those changes when I turned off the Bitx40 and then power back on, the LCD display showed something like: 7.112.0? CWL? TX Dial locked. I was able to get it back to normal LSB by holding the function button closed while powering the bitx40 back on.? I think that must be a Master Reset. I will learn, I will ask more questions if I need help.? Like where do I find the Wiki on the Bitx40? That might be very helpful, and any other suggestion on how to use and operate the bitx40 will be very helpful. I have an uBitx waiting to be wired, but I will hold off on that until, I know what I am doing with the bitx40. I admire all of you with your knowledge, and expertise.? I thank you all for your kindness and help. 72/73? de Jeff K9JP toggle quoted message Show quoted text On Thu, Dec 28, 2017 at 4:45 PM, Al Duncan VE3RRD <ve3rrd@...> wrote: Bitx40 firmware update instructions can be found at AL? VE3RRD -- Not all of me will die - - - The good I do will live forever.? <><

Join [email protected] to automatically receive all group messages.

开云体育