Hearing it over the
time signal is why it is being suggested that you disconnect
the dipole from your main rig and temporarily replace it with
a short wire.
You won't harm the
Yaesu at he power levels being produced by the Raduino.You are
only using the Yaesu to "sniff" the output from the Raduino,
in the absence of any other RF test gear.
Bill, VK7MX
toggle quoted message
Show quoted text
On Wed, Dec 20, 2017 at 07:59 pm, Vince Vielhaber wrote:
The tuning pot is connected between ground and +5
volts. When you tune it it varies the voltage going into on of
the analog ports on the nano. That voltage is mapped and a freq
is derived from that. Then the freq info is sent to the Si chip
to make that freq happen. Without the pot connected that analog
port is floating.
If it's at 5000, I'll never hear it. That stupid time station is
way too loud. I have tried it though with the plugs still
in....only unplugging it from the LCD so I could raise it up.
Still didn't hear it.
