Many thanks, Mike. I've assembled a fair number of surface mount
kits but I've just gone through cataract surgery and am having a
double vision problem so I think I'll go for the gusto and get an
assembled board plus lcd and the bezel. I already have a spare
Nano.
I don't plan to use the vfo in my BiTX40 but I've just assembled
all of the bits for an R2Pro receiver that will be part of a
transceiver project. It should be fairly easy to modify the code
for a direct conversion receiver.
I can't imagine the shipping to Canada will be more than for
Europe but I can wait for your research then I'll send the money
right away.
Thanks for everything you've done for this project.
73,
Pat
On 2017-10-15 04:39 PM, Michael Hagen
wrote:
toggle quoted message
Show quoted text
Hi Pat,
I would not no about Canada, but I have shipped
to Europe.
I will check at the PO tomorrow?? Give me an
address.
These boards are exact fit for original.? I
have LCD and Nanos.
The SI part and Crystal are hard to solder
because of small size, ask for tips if you are going to do it.
They are much better.? Level Shift, USB and
Contrast pot easy to get to, I2C and Encoder connectors.
Its $9 for the PCB, $1 Paypal.? Assembled $33
$2 Paypal.? With Nano $36 $2 Paypal.? And all with LCD $40 $2 Paypal.
You get mating connectors and some pins.
I have a neat 3D printed Bezel Kit for the LCD
too, $3.
I also have a tiny stand alone Signal Generator
PCB SI Part, 3.3 V Reg, and level shifting.
Postage Stamp size. PCBs $4 I ship.? Completed
$10.
I ship within a day US Postal.
73's & TNX
Mike,WA6ISP
On 10/15/2017 5:51 AM, Pat Byers
wrote:
Hi
Michael,
I'd very much like a board. How much? Do you take PayPal?
73,
Pat Byers??? VE3EUR
On 2017-10-14 05:16 PM, Michael Hagen wrote:
I still have lots of Raduino X bare PCBs and completed
boards.? In case you blew up stock Raduino or want to make
alternate projects.
I have sold a dozen or so, but ordered 50 PCBs.
For those wanting a Raduino board.
There is a better option than the orginal Raduino board with
it Soldered
- in Nano.
RaduinoX? PCB designed to add some features.
I have Lots of Bare PCBs and some assembled and tested.? Lots
of Bare PCBS!
Several sold to guys in this group.
I used this board, LCD, and Rotary Encoder to make a nice
dedicated RF
signal generator.
1) I wanted to be able to plug Nano in and out, not soldered.
I wanted
the USB connect next to the side of the cabinet so I can
program without
taking the lid off.? I will make a small hole.
2) Added, diode protection, more filtering and conditioning on
the power
input.? Regulator is bolted down.
3) Added a dedicated connector for Rotary Encoder with pullups
and
bounce capacitors.
4) Added an I2C connector.
5) I wanted proper Level Shifting to the Si 3V part.? Added
FETs and
pullups for that.
6) Added D0 and D1 pins on PCB.
7) Kept power and VFO connector on 5P header so no changes to
my present
wiring was necessary.
8) Put contrast Pot where you can get to it.
9) Complete documentation.
10) Fits original LCD perfectly.
Take a look if you are interested.
motdog@verizon dot net
Mike, WA6ISP
--
Mike Hagen, WA6ISP
10917 Bryant Street
Yucaipa, Ca. 92399
(909) 918-0058
PayPal ID "MotDog@..."
Mike@...
