With all the inputs, he also says Tx is fine which means problem is not the filter but has to be in the Q1 amp stage.
Raj
At 14-10-2017, you wrote: >Follow the schematic and check continuity on all the BPF inductors. You might have a broken wire. No biggy, just unsolder, unwind one winding, and solder it back making sure to burn off the enamel by holding the heat until you see it boil off when you solder it in. It's also easy to check continuity all the way from the antenna to the BPF and past the BPF to the first mixer stage.
>
>--
>Ryan Flowers W7RLF
