Bent the cover today and checked it for fit. I couldn't resist sliding the "junk" over to one side of the bench to see how the home brew station would fit together. I also had an issue with the output jumping up and down, and upon taking a further look, I found the wiper on RV136 only held by the "crimp" on one side. When I touched it, it all came apart. I carefully bent up the side that was originally unattached, placed the wiper back on, and pushed the "crimp" back down. All is good again, and I have it detuned to 1 watt out, to drive the pair of irf510's. Not finished, but getting closer. The leaning display is driving me nuts. Got to do some fixing on that. Thinking about duct taping my head over to one side, or possible putting one side of my chair on a couple of books.
